Guide to sheet materials

Jewson’s range of sheet materials is extensive and has been developed based on our customers' requirements over many years. It offers both structural and joinery quality hardwood and softwood plywood from around the world along with an extensive range of UK produced panel products such as Flooring Grade Chipboard, Medium Density Fibreboard (MDF), Oriented Strand Board (OSB) and Hardboard from Scandinavia and Northern Europe.

We are always adding to our range, including specialist products.

Door Blanks
Anti-slip plywood
SC117 flooring plywood to BS8203
Latvian Birch Plywood
‘Sundeala’ pinboard and noticeboards
‘Neat-match’ specialist MDF claddings
Flame Retardant MDF and Plywood
Veneered MDF
Sheetwood for outdoor use
Our Handy Panel range of cut size plywood and MDF
Caberdek Flooring Grade Chipboard
Duraply ‘exceptionally durable’ plywood

Speak to us in-branch and we’ll help you get the right material for the job.

At Jewson we ensure our plywood range is sourced from plantation grown hardwood and softwood timber. All of our hardwood plywood is grown from temperate hardwood species mainly Eucalyptus, Poplar, Beech and Birch. Our range of panel products come with either FSC ® or PEFC ™ chain of custody and are E1 or CARB2 compliant with respect to formaldehyde emissions.

We take the business of supplying certified, fit for purpose products very seriously. From transport and construction, packaging to furniture, whatever the end use we have the right product to meet the requirements the job demands.

Standards and grades guide

Plywood Durability EN636

EN636-2 – Plywood for use in humid conditions.
EN636-3 – Plywood for use in exterior conditions. All panel products should be sealed (edges and faces) when being used in a permanent manner externally.
BS1088-1:2003 – “Marine” plywood should have outstanding resistance to bio-deterioration (durability) over time. Biological durability of marine plywood is expected to be greater than that of plywood of the same species that meets the requirements of BS EN 636-3.

GLUE BOND EN314-2

Plywood glue bond is divided into three classes dependent on moisture resistance.
Class 1 – For interior use (urea glue).
Class 2 – For humid conditions (melamine glue).
Class 3 – For exterior conditions (phenol glue).

Plywood Face Grades

BB – Panel repaired and sanded to give smooth finish.
BB/CC – BB face/ CC reverse. CC face has some defects though most will be filled and sanded.
BB/WG – BB face/ WG reverse. WG face for use where surface appearance is not important.
S/BB – S face/ BB reverse. S face quality allows for staining and lacquering.
C+/C – C+ face sanded/ C reverse. This quality allows for live knots and offers a solid face.
CDX – C face/ D reverse. C face allows for open shallow knots and splits on the face. D face should be used where appearance is not important.
11/111 – 11 face/ 111 reverse. Face side offers a smooth finish with minor defects.
111/111 – 111 face/back. Standard grade on both sides.

Chain of custody

FSC® – Forest Stewardship Council®
PEFC ™ – Programme for the Endorsement of Forest Certification
SVLK – Timber Legality Verification System (Indonesian certification system)

Structural Integrity

CE4 – Non structural use
CE2+ – Structural use

Formaldehyde Emissions

Formaldehyde Emissions E1 – Suitable for interior and exterior use. All Jewson panel products are E1.

E1 – Suitable for interior and exterior use.
E2 – Suitable for exterior use only.